Hasegawa 1/72 B-26B Marauder

Hasegawa came out with an excellent rendition of the 1/72 B-26B/C and 1/72 B-26F/G in 2006. I am not an expert in the differences between the various models so I can not say which parts belong to which. What I do know is that these kits disappeared as quickly as they showed up here in North America as I was slow to purchase one and discovered to my dismay that the early bird does indeed get the Marauder.

Fast forward 13 years later and Eduard announced that they were going to release a reboxing with some photo etched parts, resin parts and a colorful decal sheet with markings from various ETO and MTO medium bomber groups. I was one of those that wasn't going to let my sloth get the better of me and ordered one as soon as it became available to preorder this kit. This special edition contains the plastic for the Hasegawa kit which has been previewed by our editor.

It also comes with a couple of Photo etch frets containing cockpit parts as well as replacement parts for the interior of the bomb bay, the ignition harness for the engines and scissor links for the landing gear among them. The special edition kit also comes with a set of resin wheels and a Khabuki tape masking set for the canopy and nose.

The main reason for this is the beautiful decal sheet which contains markings for eight bombers of various medium bomber groups (with two different schemes for one bomber.) Five of the schemes have the basic olive drab over neutral grey and the other four are bare metal or bare metal with olive drab. Some markings also require the painting of invasion stripes. Seven schemes include some form of well done naked lady nose art which is part of the reason this kit sold out so quickly.

It all began with the engine nacelles. A large steel fish weight was put into empty space in the front of the nacelle. The plastic bits were inserted, painted as per instructions and glued together. I then glued the wings together and then added both wings to their respective nacelle piece. Despite being warned about the poor fit of the wing to the nacelle in other reviews of the kit on MM, I still had to deal with the gap and step. I poured in some CA glue to the area and sanded it smooth with various grades of sand paper and polishing cloths. I ended up rescribing some of the lost details.

Next I started making the interior. The plastic parts were first primed with Stynylrez black primer and painted with Xtracrylix Interior green. I used most of the PE especially around the cockpit and left off all of the PE details in the bomb bay as I was going to close it up. Adding all the PE detail came around slowly as certain parts needed a number of PE to be added to it such as the instrument panel, seats, side consoles, machine guns and canopy. I opted for the “if I don't see it then I ain't doing it” plan to save me the extra headaches. A number of the interior parts which were mostly for the waist guns were not used as I could barely see them through the openings. The only area that got the full PE treatment besides the cockpit was the nose gunner/bombardier compartment as it is quite visible and open. More parts were used then not used when I dropped the main fuselage and the force of the drop knocked some parts off. I didn't want to crack open the fuselage again so I added those PE parts that I could easily fix while the harder to add PE parts were put into the spares box. Aside from my clumsiness, I didn't have any issues closing up the fuselage (I used CA glue to glue the visible seams and Tamiya extra thin for the rest of the interior joins.) Before I closed the fuselage up, I drilled out the holes for various items including the external gun packs. Note: as with the other reviewers here, I added several large fish weights to the radio compartment, painted the area black and glued the weights in place with CA glue.

One thing that stopped me for a while was losing the part that supports the rear machine guns. I ended up improvising and modifying a spare part strut from another kit into a close approximation of the rear gun mount complete with PE gunsights. Of course, I found the part in the carpet mere days after I completed the model.

As I was taking my time with the interior, I also built up the rear tailplane which is a bit unusual as it has a clear top part (for the rear windows) for the ailerons. I had to mask off the interior, spray it with silver paint then mask off the exterior before I glued it together. I did not have the best fit as the parts seemed misaligned and ended up sanding the edges off then filling/sanding the seams smooth.

I glued the wings and the completed tailplane assembly to the fuselage. The seams were dealt with using Perfect Plastic Putty and the excess wiped off with some damp Q-tips.

The propellers were painted and decaled as per instructions. I masked/painted the tips using Tamiya Flat white (as the first coat) and Flat Yellow instead of using the decals which never worked well for me.

I masked off the various openings while gluing on certain things like the waist gun windows so I can paint those parts as well as the exterior. The model was first primed with grey Stynylrez primer and then sprayed on the Neutral grey in the thin coats to allow for the paint to look “weathered.” Once dry, I masked off the neutral grey areas and sprayed on Tamiya flat black. I roughly masked off the white stripes (to avoid the crisp lines that actually aren't accurate as invasion stripes were sloppily added in real life) and painted them Tamiya flat white in thin coats in an effort to mottle the paint and show a less than uniform coat.

The olive drab was done a bit differently. I first sprayed on a thin coat of Tamiya XF-62 Olive drab then a thin coat of XF-51 Khaki drab. Once it was dry, I decided to spray on Xtracrylix faded OD in thin coats to get the worn out OD I was looking for. I masked off the various areas all along the wings using cut pieces of painters tape and then sprayed on Vallejo European Green FS34092 for the medium green lozenges. I sprayed too much and had to redo them by painting them over with OD before I got them faded and mottled enough to my satisfaction.

The canopy was masked and painted at the same time. Interior green laid down first, then the various shades of OD and Khaki drab were applied in the same manner as the rest of the plane.
Once the paint was dry, I sprayed on a couple of thin coats of Vallejo Clear Gloss in preparation for the decals.

Fortunately, the B-26B doesn't need a lot of stencils so the decals were a breeze. No issues with the markings either. I did wet the surface a little so the decals would slide a bit rather stick. They snuggled on the detail with Micro Sol and Micro Set.

I used a combination of watercolors and oil paints to do the weathering of the paint. Watercolors for the topside and oils for around the engine nacelles and underside. However, I tried not to over do it as ETO/MTO aircraft were in better shape than their PTO or naval counterparts.

The excess oil paint weathering was removed using turpinoid damp Q-Tips while the watercolors were removed with water dampened Q-Tips.

Once it was dry, the model was sprayed with Tamiya Flat which caused a reaction with something on the surface to look like it had been dipped in salt water. I was not very happy with this result. I sprayed on thinned faded OD over most of the crud, but left areas near the decals alone.