VEB/Plasticart 1/100 Tu-134
KIT #: ?
PRICE: $5 or so when new   
DECALS: One option
REVIEWER: Richard F
NOTES:

HISTORY

Nikita Kruschev, the irascible Soviet leader, visited France in 1960 and flew in a Sud-Aviation Caravelle. He was so impressed by its quiet cabin that he ordered the Tupolev design team to build a similar plane. The Tu-134 was born.

Known as "Crusty" by NATO, the Tu-134 adopted the same quiet-cabin rear engine layout of the Caravelle and numerous other aircraft that had been inspired by the French design. The Russian airliner's wings were swept further back than the other aircraft, and it kept the glass nose of its own family, the earlier Tu-104 airliner and the Tu-16 Badger bomber. But it was as elegant as the Caravelle, and with its distinctive Tupolev wing, perhaps a little more aggressive looking.

It entered service in 1967, nearly a decade after the Caravelle, and flew for many years with Aeroflot, LOT, Malev, Interflug and CSA, the main East Bloc airlines during the Cold War. These days, it's banned in the EU due to its ancient, noisy engines. You can still fly on one in Russia or Central Asia, if you trust those second and third tier airlines!

If you're really game, you can try your luck with Air Koryo, the North Korean carrier, which uses Tu-134s on some of its few international legs.

My research reveals that the subject of this kit, CCCP-65610, might have been built before 1972. I found a photograph of it at Stockholm in that year. Later, it, or at least another Tu-134 with the same registration number, was photographed in Interflug colours in 1991. That aircraft no longer had a glazed nose. Apparently it then moved to Atyrau Airways in Kazakhstan, where it was in service at least as recently as 2002 under the number UN-65610. Who knows if it's the same plane as depicted in my old VEB kit?

THE KIT

Ah, VEB! What a love affair I have with your model kits. This is classic VEB - chunky plastic, no real detail, so-so fit, but fantastic subject and easy to build.

There is no interior detail at all - a bit of a shame because in 1/100, with a big cockpit window and a glazed nose, there is surely scope for something to appear inside. If you want that, build it yourself.

CONSTRUCTION

This was a straightforward build. The most important thing is to put plenty of noseweight. The wings are way back, and the T-tail gives it a strong tendency to tailsit. There is tonnes of room, so I put a few spare screws inside, far enough back that you couldn't see them through the nose transparency.

I put the fuselage windows in, then glued the fuselage together. Some tape was needed to keep it aligned while the glue dried. I masked each window individually.

Make sure you don't put the engines on until after it's painted and the decals have been applied. This makes things a lot easier.

The wheels are very simple and fairly basic looking.

You can build this entire kit in about fifteen minutes - there really isn't much to say.
(Your editor has built this kit back around 1982 and I can assure you that it took me more than 15 minutes to build!)

I spent quite a while sanding, though, to get a decent smooth join on top of the fuselage. That is one time-consuming area that will make an obvious difference to the finished result.

I lost the ill-fitting nose glazing after a few years. Recently, I discovered that the short nose on my Revell 1/144 Super Constellation, which is moulded in clear plastic, is just about a perfect fit. In profile it's the wrong shape, but in any other angle it looks fine. I painted on some window frames, attached it, and having repaired the plane, I decided to write a review.

COLORS & MARKINGS

I made this kit in the early 1990s, before great websites like www.airliners.net existed. I only had the box art and one picture from a book to go on. But it turns out I was fairly close - a photo of this exact plane on www.airliners.net shows CCCP-65610 parked at Stockholm in 1972 wearing almost this paint scheme.

The only mistake I made was painting the lower fuselage in a light grey. It should have been an aluminium colour. That was hard to tell from the picture I had. I used Testors spray cans for this model: gloss white, gull grey and aluminium for the wings.

The decals were - amazingly - quite effective. Apart from the overwing serial numbers, they have stayed in place very well in the nearly 20 years since this was made.

CONCLUSIONS

I love VEB kits and always recommend them to adventurous modelers. If you only like the Hasegawa and Tamiya building experience, then don't go for this kit. If you have put a few older Airfix kits together in your time, then you won't have any trouble with this one.

It's a rare bird, and a good looking one. If you can find it at a reasonable price, snap it up and put it together.

Richard F

September 2011

If you would like your product reviewed fairly and fairly quickly, please contact the editor or see other details in the Note to Contributors.

Back to the Main Page

Back to the Review Index Page