AZ Models 1:72 Supermarine
Spiteful “Special”
KIT #: | AZ7277 |
PRICE: | NZ$46.00 |
DECALS: | Four options |
REVIEWER: | Zac Yates |
NOTES: |
comes with
“What If?” decals |
HISTORY |
The Spiteful was the last
land-based development of the legendary Spitfire. Utilising an all-new laminar
flow wing and a more powerful Rolls-Royce Griffon engine than ever before, the
Spiteful bore very little resemblance to the first Spitfire of 1936. Indeed the
type was at one point reportedly set to receive the name “Victor” as it was so
different, but this was passed over. The first prototype (flown
Due to the rapid development of
the jet aircraft, and possibly also the unfavourable stalling characteristics
exhibited by the prototypes, the Spiteful never achieved squadron service. The
Spitfire line was dragged out a little more by the Seafang – essentially a
hooked Spiteful sporting folding wings and a six-blade contraprop – but soon
Supermarine itself moved into jets. Accounts vary, but around 20 of three
Spiteful marks are believed to have been built. Sadly it appears no real remains
of any Spiteful remain, but I remain hopeful someday someone will perhaps make
even a fibreglass “shape” for display somewhere.
The Spiteful may have been an incongruous end to the Spitfire legacy, but it was a remarkable design in its own right. Besides, the thing screams “mean” just sitting there!
THE KIT |
From what I gather this is the
latest of three Spiteful kits available in 1:72: a fairly scarce Pegasus
injection-moulded release came first, and more recently CMR came out with what
looks to be a very fine resin kit. I don’t know of any vacform Spitefuls
(There is one that was done by Rareplanes. Ed).
If the
The massive underwing radiators
are separate, and have some raised detail on the inside faces. The undercarriage
doors are all separate and are commendably thin, but some may elect to
scratchbuild their own. Separate wheel wells are also included and these have
limited detail....mind you, not having ever seen shots of a Spiteful’s wheel
well, this could well be 100% accurate! The carburettor intake is in two pieces
and is hollow, the rudder is separate and the propeller consists of five blades,
spinner and backing plate.
The cockpit is adequate for 1:72,
especially with the fairly thick canopy included: you get a floor, instrument
panel (with very fine raised detail), gun sight,
control stick, seat and rear frame. The vertical plate of the headrest is
supplied, but not the support shown in the painting instructions.
Strangely there are two parts
labelled number 28 in the parts diagram, and these do not appear anywhere in
assembly. They look suspiciously like the pitot tube seen in photos of the real
Spitefuls, but the instructions have you make it from 6mm of plastic rod...which
looks nothing like the real thing...perhaps production Spiteful XIVs would’ve
had these? For my part I’ll use the number 28 in my build.
The one-piece canopy is the sole
transparency included, on a very small piece of sprue. Framing is nice but the
canopy is a little thick. The instructions suggest you can hack at the canopy to
pose it open, but I believe most would either leave it closed or find a suitable
vacform replacement (Spitfire 22/24 perhaps?). Despite being loose in the same
bag as the main sprue, my canopy was totally scratch-free.
Which brings me quite conveniently
to the decals. As the vast majority of MM readers will know, the Spiteful never
made it to operational service. AZ released this Spiteful with decals for three
prototype/pre-production aircraft, but this one comes with no less than four
hypothetical schemes. They are all interesting and possibly realistic options.
Firstly we have RN301/YB-A, a Royal Air Force machine in
CONCLUSIONS |
For the true Spitfire fan you
simply must have a Spiteful in your line-up, and by price alone the AZ Model is
my pick. The Pegasus kit seems to need a fair amount of bashing to make an
accurate representation (see
Peter Hobbins’ review here at MM),
and the CMR kit is out of many modellers’ price range....plus there is the resin
“scare factor” to be considered.
I’m more than happy with the AZ
kit, as it looks to be accurate and fairly simple to build. There’s no resin or
photoetch, but out of the box it will definitely look the part when complete. It
will certainly make for an interesting comparison with my Airfix Spitfire
Prototype K5054 when completed.
REFERENCES |
Spitfire: A Complete Fighting
History – Price, Alfred; PRC 1991
http://www.airwar.ru/enc/fww2/spitful.html - some great shots of the various
Spitefuls, both in flight and on the ground.
If you would like your product reviewed fairly and quickly, please contact me or see other details in the Note to Contributors.