KIT: | ICM 1/48 Luftwaffe pilots and ground personnel |
KIT #: | 48082 |
PRICE: | €7.95 |
DECALS: | None provided |
REVIEWER: | Sjon van der Heiden |
NOTES: | Not all figures assembled....yet. |
HISTORY |
Aerial combat has always been surrounded by a certain romance. Perhaps less
glamorous, but probably just as important, is the need to service and repair the
very aeroplanes which usually get all the credits. This set gives you an
opportunity to depict the men which helped getting and keeping those planes in
the air.
THE KIT |
This kit is an injection
moulded one. It contains 41 parts in white, somewhat softer than usual plastic.
All parts are on one sprue. When assembled the kit builds into seven figures;
four mechanics and three pilots, with one of them in flying suit with parachute,
the other two in dress uniform. The kit includes no optional parts other than
two different sorts of caps and holsters. No additional accessories are
provided. One does not really need instructions for constructing this kind of
kit, but they're clear anyway. Elaborate, Modelmaster colour references are
given on the back of the box in full colour. As one might expect, no decals are
provided.
The level of detail of this kit is amongst the best I've ever seen in injection
moulded plastic. There is no flash whatsoever and every little detail on the
clothes and caps is very well done and absolutely crisp. The poses of the
figures, and especially their individual facial expressions, are very well
captured. I'll bet there are more than enough resin sets out there which cannot
hold the comparison to this plastic kit. And that at less than a third of the
price.
CONSTRUCTION |
I'm doing these figures to
adorn a diorama I'm currently working on, so I won't be assembling the entire
set since I have no purpose for all of them. I chose to start with the two
pilots in dress uniform with leather overcoats and a kneeling mechanic. After
minimum clean up everything was assembled accept the hip holsters of the two
standing figures. The instructions called for a third holster for the mechanic
but I figured he would have little need for that so I left it out. All parts fit
perfectly but then again, at this stage, I don't see how anything could really
go wrong. That is, I must say I was far from satisfied with the pose of the
pilot in the long overcoat. He seemed to have hidden several balloons underneath
it (either that or he must have had a serious weight problem from the waist
down), so I had to take off quite a bit of plastic to get his leather coat to
look realistic. I also tilted his head a little to give him a better composure.
Once all had dried overnight, the painting could start.
COLORS & MARKINGS |
After all the base coats were done, I washed the recessed areas with darker
colours and highlighted the outstanding details by means of drybrushing. I used
Humbrol enamels only.
The hands and faces were washed with light brown to accentuate the contours,
some slight colour was applied to the lips and their cheeks, noses and ears were
highlighted slightly with white pencil. As a last I put a little graphite-pencil
on their eyes to give the faces some focus.
The silver details on the caps are mostly done with a silver pencil, all other
metallics are done with (Humbrol) paint. At first I tried to do the white line
on the caps with a white pencil, but that didn't work out quite well. So I
removed the white pencil and re-did it with enamel paint (which was really a
matter of painting the white, touching it up with blue, re-doing the white that
got lost in the touch up, applying more blue, getting the white out once more,
etc.). When that was done (and I was happy with the result) I figured I should
have simply scraped the blue
paint of the rim, since the figures are in white plastic! I'm not sure if it
would have looked right, but I cannot think of anything why not. Maybe some
other time.
One of the last jobs were the knights crosses on the two standing figures. I had
done these before in the past and had always managed to foul them up so I opted
for a different approach. I cut them out of a spare piece of black decal. I
thought this would be easy but it turned out to be one of the most fiddly jobs I
ever had to do. Holding on to the 'cross' when making the last cut turned out to
be near impossible and it took several attempts to get two of them that at least
vaguely resembled an knights cross. After that they went on without a fuss and
they look much better this way then if I would have painted them on. They of
course lack their silver lining but I'm afraid any attempt in that direction
will not be an improvement so I'm learning to live with that. As a last, the two
holsters were attached to the two standing figures using white glue.
FINAL CONSTRUCTION |
After I had taken the first photographs I still had the feeling the pose of the
pilot in the long overcoat wasn't quite convincing. And then I realised what was
missing: a cigarette butt. So I scratch-build two fingers onto his clenched fist
and glued 2mm of very fine stripped electrical wire in-between those and
re-painted the whole deal. And after this final touch I was finally happy with
his composure. Due to the small size (or the quality of my photographs) you
actually have to look twice to even notice, but I once heard someone say that
subtle details are the best so I'm going with that.
CONCLUSIONS |
This is an excellent kit to dress up any Luftwaffe diorama. All figures are very
life like, including the ones I've yet not come round to building. I know the
fact I had to do some minor surgery to one of the figures contradicts this, but
that was really the only problem with this kit, and it was real easy to fix.
This little project was real fun to do and I would highly recommend this kit to
anyone with a little painting experience, some patience,.. and good near
eyesight of course.
REFERENCES |
None other than the instructions and box-art.
July 2006
If you would like your product reviewed fairly and quickly by a site that has over 300,000 visitors a month, please contact me or see other details in the Note to Contributors.