We all knew it was just a matter of time before we had a proper 1/32 early Bf-109 conversion set. For some it has taken too long, but now the wait is over. This is the first of three sets and so it is proper that we start with the initial production Bf-109A, an aircraft that was built in quite small numbers, but was built. A few of these planes were sent to Spain where they fought alongside some of the prototype aircraft before the later Bf-109B, C, and D versions were sent.

First of all, the molding of the parts is exceptional. No one else does resin better than what you'll find from Cutting Edge. OK, label me a stooge if you want, but those who have built CE sets will agree. The moldings are free from any of the usual mold faults one finds with some other resin sets.

This set consists of everything you need forward of the canopy and includes a new windscreen and aft canopy section as well. There is also a new lower center wing section and a set of flaps to go along with it. You can attach the kit landing gear directly to the new lower wing or you can replace the molded in wheel wells with more detailed ones. Your choice.

Instructions consist of four pages of very detailed 'how-to' for doing this conversion. This is not a conversion for the tyro and one really needs to have some experience in the genre before doing this. Especially as the Hasegawa 1/32 109E is not the best fitting kit in the world. However, by working carefully and referring to the large, clear photos included, you should be able to complete this conversion without too much trauma.

November 2007