Hobby Boss 1/35 M3A1 White Scout Car (early)

Design of the vehicle began at the White Motor Company, based in Cleveland, in 1937. It had .25 in (6.4 mm) face-hardened armor, full-time four-wheel drive (with no way to disengage it), four-speed manual constant-mesh (non-synchromesh) transmission (with one reverse gear) and two-speed transfer case, leaf spring suspension, manual steering, and (unusually for the period) vacuum-assisted (power) brakes. The wheelbase was 131 in (3.3 m), tread 65.25 in (1.657 m). The wheels were 8.5 in (220 mm) wide, 20 in (510 mm) diameter, and used standard 12-ply military non-directional tires. Fuel capacity was 30 US gal (110 l).

The original order was for 64 units, all of which were given to the 7th Cavalry Brigade. Eventually the Army decided to adopt an improved version, designated M3A1. The new version had a longer and wider hull. In front of the bumper an unditching roller was mounted. The M3A1 could carry up to seven infantry and provide fire support with three machine guns - one .50 caliber (12.7 mm) and two .30 caliber (7.62 mm) - mounted on a skate rail around the hull.

Production of the M3A1 started in 1940 and lasted until 1944, with 20,918 vehicles built.

The design influenced the later U.S. halftrack designs such as the M3 halftrack and the post-World War II Soviet BTR-40. The early M2 halftrack copied the armor layout as well as the skate rail machine gun mounts.

The M3A1 first saw combat in the Philippines in 1941-1942, and was also used by the cavalry units of the US Army in the North African Campaign and the invasion of Sicily. It was used in traditional cavalry roles such as scouting and screening; also as an armored command vehicle. By mid-1943, the drawbacks of the design - its open top, poor off-road mobility, and poor armament - were evident. During 1943 most US Army units replaced the M3A1 with the M8 armored car and similar M20 Utility Car. A small number of M3A1s were retained and employed in Normandy. A few M3A1s were used by the US Marine Corps in the Pacific theater, but none saw combat.

The M3A1 was also supplied via lend-lease channels to the Soviet Union (3,034; these vehicles remained in service until at least 1947) and Britain, and used to equip Free French Forces, Belgian, Czechoslovak and Polish units. After the war, many vehicles were sold, mostly to Asian and Latin American countries. In Red Army service it was used primarily as a reconnaissance vehicle, but also as gun tractor for the ZIS-3 76-mm field gun. It remained in wide service throughout the war. In British and French service M3A1s were used as observation vehicles for field artillery observers, as ambulances, and as scout vehicles.

A few vehicles were used by Israel in the 1948 Arab–Israeli War. At least one Israeli M3A1 was modified with top armor and a revolving turret. France employed its M3A1s in the First Indochina War and the Algerian War.

By late 1990, the only country to keep the M3A1 in service was the Dominican Republic.

This is not the first 1/35 White scout car to be kitted as I believe Zvezda and perhaps Italeri have also produced it in the past. However, the HobbyBoss kit has got to be the best of the bunch. Like their other vehicle kits, this one has a completely detailed chassis with suspension, driveline and a complete engine. It has nicely detailed plastic tires that are separate from the wheels, making painting a breeze. In fact, the first half of the construction booklet is devoted to getting the chassis together.

A full driver's and crew compartment is included that has detailed storage boxes and seats for the aft section. The instrument panel has separate decals for the various instruments. A couple of interesting additions to this kit are movable armored radiator vanes and a skate rail on which one can move the two .30 cal and single .50 cal machine guns. One also has separate doors and engine covers so if one wishes, these can be displayed open. The small photo etch fret is for some engine and body detail parts.

Markings are provided for two unidentified units. The box art has a pre-war insignia for the hood and forward grille. This is shown as a more greenish olive drab overall. The other is in a darker drab with markings for what appears to be the 7th Cavalry. It has large black areas of camo on the paint work. The full color painting guide offers a selection of paint brands so one is sure to be available in your area.

This is yet another cutting edge kit from the folks at Hobby Boss. It is great to see these sorts of wheeled military vehicles coming from Hobby Boss and it is sure to build into a superb model.

http://en.wikipedia.org/wiki/M3_Scout_Car

April 2011

Thanks to Squadron Products for the preview kit. Get yours today at your local hobby shop or have them order it for you.

If you would like your product reviewed fairly and fairly quickly, please contact the editor or see other details in the Note to Contributors.

Back to the Main Page

Back to the Review Index Page

Back to the Previews Index Page